Alpitronic HYC 150 / 200
ApprovedModels GZ30201 (3.5 m), GZ30202 (5 m) and GZ30203 (5.5 m). For CCS Combo 2 400 A dry cable, 500 A and 600 A glycol-cooled. Retrofit to existing sites possible.
powered by Ladezon GmbH
GridZon protects the cables on your high-power chargers with a cut-resistant UHMWPE sleeve, an integrated tamper wire and real-time alerts. Retrofittable to existing sites, with no intervention in the certified metering system.
Universal system in around 15 minutes per cable, full version in around 1.5 hours. Can be fitted while the charger stays in service, with instructions and explainer video.
Listed for HYC 150/200/300/400, no screws and no intervention in the certified metering system.
Siren and strobe light on site, with simultaneous alerts by SMS, phone call or email.
Tamper wire active, eSIM connected
Already in use with operators such as
Cut-resistant fibre
Real-time monitoring
Siren and strobe light
The problem
Cable theft at rapid chargers is rising sharply across Europe. Operators report hundreds of incidents within a few months. And the damage does not stop at the cable.
New DC cable, engineer visit, fitting and recommissioning. For every incident and every charging point, however often it happens.
The charging point stays out of service until the replacement arrives. At high-power sites, every lost day comes straight off your margin and, on grant-funded projects, off your availability rate.
Broken charging points are rated publicly in apps and roaming networks. Drivers who made a wasted trip do not come back.
And the crime itself
It is not the cable that gets stolen, it is the copper inside. That is why unmonitored sites are hit mostly at night, and why a camera on its own is not enough.
Sleeve, connector housing, alarm unit and fitting: every component up close.
The solution
Part 1 – The sleeve
The sleeve is made from high-strength UHMWPE fibre. At the connector end sits a tamper-proof stainless steel housing, powder-coated and available in your corporate colour on request. Available for every cable length, with custom print if you want it, including for chargers already in service.
High-strength, cut-resistant UHMWPE fibre
Powder-coated stainless steel housing on the connector
Every cable length, colour of your choice
Part 2 – The electronics
A tamper wire runs inside the sleeve. Any attempt to tamper with it immediately triggers a 117 dB siren and a strobe light on site, together with a silent alarm to your control room. Through the built-in eSIM you see the status of every protected cable in real time.
Tamper wire detects every tampering attempt
Silent alarm by SMS, phone call or email
Online monitoring via eSIM with status display
Space for a GPS tracker on the connector
Every figure comes from the data sheet: verifiable, not estimated.
Audible alarm
High-output siren, with a strobe light as an additional visual signal.
Sleeve
Cut-resistant high-strength fibre, not just a simple steel braid.
Tamper wire
Runs inside the sleeve and detects every attempt to tamper with the cable.
Online monitoring
Real-time status and remote access, without your own network infrastructure.
Fitting time, universal system
Full version in around 1.5 hours per cable. Both can be fitted by your own team, instructions and video included.
Availability
Any cable length, colour of your choice, custom print on request.
The deciding point
GridZon is neither connected to the charging electronics nor screwed to the charger. The certified metering system stays untouched and the charger keeps its approval status. That is why it can be retrofitted to existing sites while they stay in service, with no changes to the enclosure.
The system runs independently. The charger's metering chain is not touched.
Fitted without any work on the charger's enclosure or mounting points.
Existing infrastructure does not need to be switched off for long during fitting.
Approvato da Alpitronic
Alpitronic lists GridZon among its approved cable sleeve solutions. The reference is the document “Statement Third Party Applications” of 11 November 2025. It lists models GZ30201, GZ30202 and GZ30203 for HYC 150/200/300/400 with CCS Combo 2 cables of 3.5 m, 5 m and 5.5 m. According to Alpitronic, solutions not on this list may affect the product warranty. GridZon is on the list.
Video
Tamper wire, siren, strobe light and silent alarm working together, filmed on a real charger.
Tell us your charger type and number of cables, and we will come back with price and delivery time.
Compatibility
Approved by Alpitronic for HYC 150/200/300/400 with CCS Combo 2 cables of 3.5 m, 5 m and 5.5 m. The system is available for every cable length.
Models GZ30201 (3.5 m), GZ30202 (5 m) and GZ30203 (5.5 m). For CCS Combo 2 400 A dry cable, 500 A and 600 A glycol-cooled. Retrofit to existing sites possible.
Models GZ30201 (3.5 m), GZ30202 (5 m) and GZ30203 (5.5 m). For CCS Combo 2 400 A dry cable, 500 A and 600 A glycol-cooled. Retrofit to existing sites possible.
We check based on cable type and connector shape, and come back to you with a clear answer.
Your charger or cable length is not listed? The system is available in every length. Send us the type, cable model and length, and we will check compatibility free of charge. On chargers with a Cable Management System (CMS), the cable holders 217317 and 217318 are ordered directly from Alpitronic.
Who it is for
From a single charging point at your premises to a hub with availability targets.
Multiple sites and demanding availability targets. The silent alarm goes straight to your control room.
Charging points on your premises that are unattended outside opening hours.
Charging as a customer service. A broken charger reflects straight back on your guests' experience.
Public spaces with availability requirements tied to funding. Retrofit to existing sites without recommissioning.
Tell us your charger type, the number of cables to protect and their lengths. We check the fit and come back to you with a clear answer.
Reply within 24 hours
Together we define length, colour, optional print, alarm channels and the GPS option. You receive a binding quote.
Binding quote
You fit it yourself: universal system in around 15 minutes per cable, full version in around 1.5 hours, with instructions and explainer video. Monitoring is active straight away.
15 min to 1.5 h per cable
Tell us your charger type, number of cables and cable lengths. You get a reply with price and delivery time, free of charge and with no obligation.
or call us directly
+49 2381 3392157References
“We have fitted all of our DC chargers with the ladezon cable protection system. Since commissioning there has been only one theft attempt. The protection and the DC cable were damaged, but the suspected offender fled as soon as the alarm went off. The damage was limited to a single cable; otherwise all 8 cables at the station would most likely have been stolen.”
“GridZon is one of the few solutions on the market that combines cut-resistant cable protection and integrated alarm technology in one effective product.”
Charging points protected
Operators equipped
Fewer incidents
Can't find your question?
+49 2381 3392157No. The system is neither screwed to the charger nor connected to the charging electronics. There is no work on the enclosure or the metering equipment.
Request a quote
Tell us which chargers you operate. You get a reply with price and delivery time, free of charge and with no obligation.
Free compatibility check for your charger
Your data is never passed on to third parties
Direct contact at Ladezon GmbH in Hamm, Germany
Systems in stock ship within two weeks